Call us : 86.137 5507 9029
uko@ukocarbide.com
Call us : 86.137 5507 9029
uko@ukocarbide.com
Free Get A Quote
Free Get A Quote

Carbide Plate

By |2021-11-09T02:20:40+00:00September 26, 2021|Products|

Carbide plate is one of the many materials of tungsten steel, which is made by metallurgical methods such as pulverizing, ball milling, pressing, and sintering. The composition contents of WC and CO in different uses of carbide plates are not consistent. It is widely used.

Comments Off on Carbide Plate

Carbide Hot Melt Drill

By |2021-11-09T02:21:30+00:00September 16, 2021|Products|

Fdrill, also known as cemented carbide hot melt drill, has been successfully applied for more than 30 years. It has changed the traditional drilling and fastening process solved the problem of tapping and fastening thin metal plates and thin metal pipes.

Comments Off on Carbide Hot Melt Drill

Cold Heading Dies

By |2021-11-09T02:22:27+00:00September 16, 2021|Products|

Cold heading dies also called tungsten carbide punching, cold forming dies, or heading dies. It is compressed by powder metallurgy, with high hardness, high-strength cemented carbide dies, as an important working component of cold heading machine, completes punching, bending, stretching, etc., is widely used in the field of production and processing.

Comments Off on Cold Heading Dies

Tungsten Carbide Balls

By |2021-11-09T02:26:19+00:00September 16, 2021|Products|

Cemented carbide ball, commonly known as tungsten steel ball, it refers to the ball and ball made of cemented carbide. Cemented carbide ball has high hardness, wear resistance, corrosion resistance, bending resistance, and bad service environment. It can replace all steel ball products with good wear resistance, and its wear resistance is tens to hundreds of times that of steel ball, It is a powder metallurgy product sintered in vacuum furnace or hydrogen reduction furnace with high hardness refractory metal carbide (WC, TIC) micron powder as main component and cobalt (Co) or nickel (Ni), molybdenum (Mo) as binder.

Comments Off on Tungsten Carbide Balls

Tungsten Carbide Strips

By |2021-11-09T02:28:16+00:00September 15, 2021|Products|

Carbide strip is one of many tungsten carbide materials, which is named for its rectangular plate. It is mainly made of WC tungsten carbide and co cobalt powder mixed by metallurgical methods through pulverization, ball milling, pressing and sintering. The component contents of WC and CO in cemented carbide strips for different purposes are different, and the application range is very wide.

Comments Off on Tungsten Carbide Strips

Carbide Rods

By |2021-11-19T09:01:42+00:00September 14, 2021|Products|

Carbide rod is a tungsten steel round bar, also known as tungsten steel bar. In short, it is tungsten steel round bar or cemented carbide round bar. Cemented carbide is a composite material composed of refractory metal compound (hard phase) and bonding metal (bonding phase) produced by powder metallurgy.

Comments Off on Carbide Rods

Circular Saw Blade

By |2021-11-09T02:33:58+00:00September 14, 2021|Products|

Circular saw blade is a general term for thin circular tools used to cut solid materials. It is divided into diamond circular saw blade for stone cutting, high-speed steel circular saw blade for metal material cutting (without cemented carbide cutter head), and cemented carbide saw blade for solid wood, furniture, wood-based panel, aluminum alloy, aluminum profile, radiator, plastic, plastic steel, etc.

Comments Off on Circular Saw Blade

Router Bits

By |2022-02-26T07:16:13+00:00September 13, 2021|Products|

Router bits for woodworking is a rotary cutter with one or more cutter teeth. Through the relative movement between workpiece and cutter, each cutter tooth cuts off the allowance of workpiece intermittently in turn. The installation methods of woodworking milling cutter are divided into two types: sleeve milling cutter with hole and milling cutter with handle; The structure of the set milling cutter has three types: integral type, insert type and combined type. Woodworking milling cutter is selected through three key points: spindle rotation speed, feed speed and cutting depth.

Comments Off on Router Bits

Carbide Reversible Knives

By |2022-02-26T07:05:26+00:00September 11, 2021|Products|

Reversible knives have two to four cutting edges, when the blade becomes dull, just loosen the screw fastening the blade, rotate and retighten it, so as to save working time and do not need to re-clamp the tool, another important feature of the reversible knives is that it has no wear of blade edge and strictly ensures the tolerance.

Comments Off on Carbide Reversible Knives

Woodworking Tools

By |2022-02-26T03:38:13+00:00September 10, 2021|Products|

Spiral cutterhead evenly distributes the planing points to each processing blade, and fine-tune the angle between the blade and the processing surface, which can be easily adjusted to adapt to the processing of different materials. It is the standard tool for woodworking machinery.

Comments Off on Woodworking Tools

Title

Go to Top